Double-Ended Door Hinge Adjustment Wrench
Pickup currently not available
Processing takes 5–15 business days. Tracking provided.
Straighten a sagging door and even out the gap without taking it off its hinges.
- 14 mm and 19 mm slotted ends for flag and butt hinges
- Welded one-piece steel, galvanized finish
- No screws out, no door off the frame
Shipping & delivery
Orders are processed in 5–15 business days. Transit times vary by destination. See our Shipping Policy for estimates. Every order is tracked. We email you a tracking link when your parcel leaves.
Returns
You have 30 days to return an item. Email support@easedwell.com first and we'll tell you how.
If it arrives damaged, faulty or wrong, email us a photo with your order number. We'll resend it or refund you.
Fix the sagging door. Leave it on its hinges.
Slip the wrench over the hinge knuckle, lean on the bar, and the hinge leaf bends back into line. The gap evens out, the door stops rubbing the frame, and the latch catches again. No screws come out and the door never leaves the frame.
- No door removal
- 14 mm + 19 mm ends
- One-piece welded steel
Doors drift out of line. Hinges are usually why.
Years of opening, slamming and the weight of the door slowly bend a hinge leaf. The door drops on the latch side and the gap around it goes crooked. Replacing the hinge or calling someone out is overkill when the hinge only needs nudging back.
- It rubs at the topThe corner scrapes the frame every time it closes.
- The latch missesYou lift or shove the door to make it click.
- Uneven gapsWide at the top, tight at the bottom, or the other way round.
- It swings on its ownA door out of plumb drifts open or closed.
Slip on, push, check. That is the whole job.
Both ends are slotted steel sockets. The slot lets the socket slide down over the hinge knuckle with the leaf sitting in the gap, so it wraps the barrel instead of pinching it. The long bar then gives you the leverage to bend the leaf by a small, controlled amount.
- Pick the end that fitsTry the 14 mm end on slimmer hinges and the 19 mm end on thicker ones. It should slide on snugly.
- Slide it over the knuckleLower the socket onto the hinge barrel from the top or bottom, with the hinge leaf passing through the slot.
- Push the bar gentlyTurn one way to widen the gap and the other way to narrow it. Go a little at a time.
- Close the door and checkLook at the gap and the latch. Repeat on the same hinge or the next one until it closes cleanly.

1Line the slot up with the hinge leaf. 
2Lower the socket over the barrel. 
3Grip the bar and push it a little to one side.
Check the hinge barrel before you start.
Close the door and look at the hinge side. If there is a round barrel (the knuckle) where the two leaves meet, the wrench can grip it. That covers both common types:
- Flag (lift-off) hingesOne leaf on the frame and one on the door, offset, with a barrel in two parts. Common on metal, fire and security doors.
- Standard butt hingesTwo flat leaves that fold together, with a jointed barrel. The usual hinge on house doors, closets and cabinets.
Then measure straight across the barrel with a ruler. Up to 19 mm (0.75 in) fits one of the two ends.
Inner opening of 1.4 cm (0.55 in) for slimmer hinge barrels on interior and cabinet doors.
Inner opening of 1.9 cm (0.75 in) for thicker barrels on heavier doors. Barrels up to 19 mm across will fit.
Not for concealed cup hinges inside kitchen cabinets. They have no barrel to grip and adjust with the screws on the hinge arm.
One wrench for doors all through the house.
- Living room and bedroom doors
- Wardrobe and cabinet doors
- Metal security and entry doors
- Fire doors, shop doors and cleanroom doors
- Wood, metal and composite doors




Welded steel where the force goes.
Welded in one piece
Both sockets are welded to the bar, so there is no joint to loosen or wobble while you push.
Galvanized finish
A galvanized, anti-rust surface helps the steel hold up in a damp garage, basement or toolbox.
Long, rigid bar
The 12 mm steel bar gives you plenty of leverage without a lot of effort, and the whole tool still fits in a drawer.
Why not just use what is in the toolbox?
-
Flat jaws, round barrelAn adjustable wrench only touches the barrel in two places, so it tends to slip off as you lean on it.
-
A socket that wraps aroundThe hinge wrench sits over the barrel and grips it all the way round, so the push goes into bending the leaf.
This hinge wrench
- The door
- Stays on its hinges
- Grip on the barrel
- Slotted socket wraps right around it
- Control
- Small push, check, repeat
- What you need
- This one tool
An adjustable wrench
- The door
- Stays on its hinges
- Grip on the barrel
- Flat jaws on a round barrel tend to slip
- Control
- Hard to keep square while you push
- What you need
- A wrench and some patience
Replacing the hinge
- The door
- Comes off and goes back up
- Grip on the barrel
- Not needed
- Control
- New hinge has to be lined up again
- What you need
- A new hinge, a screwdriver and a helper
The details.
| Type | Double-ended hinge gap adjustment wrench |
|---|---|
| Openings | 14 mm (0.55 in) and 19 mm (0.75 in), both slotted |
| Works with | Flag (lift-off) and butt hinges with a barrel up to 19 mm (0.75 in) across |
| Overall length | About 21 to 28 cm (8 to 11 in) |
| Bar diameter | 1.2 cm (0.47 in) |
| Socket height | 4.5 cm (1.77 in) |
| Weight | About 230 g (0.5 lb) |
| Material | Welded one-piece steel, galvanized |
| Adjusts | Widens or narrows the hinge gap |
1 double-ended hinge wrench
Both sizes are on the same tool, so there is nothing to swap or lose.
- Work in small steps and close the door between pushes.
- Wear work gloves for a better grip on the bar.
- Hold the door steady with your other hand while you push.
- Wipe the wrench dry after use and keep it in a drawer or toolbox.
Every crooked door in the house, sorted in minutes.
A sticking bedroom door, a wardrobe that will not close, a front door that drags at the frame. Slip it on, push, check, and get back to your day.
Why Easedwell
We choose practical things that do a real job around the house, describe them honestly, and look after you if something isn't right. Questions? support@easedwell.com
Questions
How do quantity savings work?
This product costs less when you buy more. The savings are real and are applied automatically in your cart, with no code needed.







