
Helps hold the temperature
The reflective layer bounces back summer sun, and air trapped in the honeycomb cells slows heat moving through the window. Rooms stay cooler on bright afternoons and hold warmth better on winter nights.
Pickup currently not available
Processing takes 5–15 business days. Tracking provided.
Real darkness at any hour, from a sealed frame that fits your window with no drilling.
Orders are processed in 5–15 business days. Transit times vary by destination. See our Shipping Policy for estimates. Every order is tracked. We email you a tracking link when your parcel leaves.
You have 30 days to return an item. Email support@easedwell.com first and we'll tell you how.
If it arrives damaged, faulty or wrong, email us a photo with your order number. We'll resend it or refund you.
Framed no-drill blackout blind
A blackout shade that lives inside its own aluminum frame. Slide it shut and the edges are closed off, so the glow around the sides that ordinary blinds let through has nowhere to come in.
Built to the width and height you enter, then pressed into the window recess without a single drill hole.
How to measure and order
The problem with most blackout blinds
Most "blackout" blinds and curtains block light through the fabric and then leave a bright outline around it. At 5 a.m. in June, or after a night shift, that outline is what wakes you.
This blind deals with the gap itself. The shade slides inside channels built into the frame, and the frame fills the window recess with brush and weather strips around it, so there is no open edge for light to slip past.

How it is built
Each part has one job: leave light no way around the shade.
A slim, rigid frame, about 1 in wide and 1.3 in deep, that holds its shape across the window and carries the tracks.
Non-woven polyester cells with a reflective inner layer. Pleated, so it folds into a slim stack at the edge when open.
Stick around the outside of the frame to close the gap between frame and recess, and take up small differences in the recess.
Two screws in the side frame tighten the inner cords. If the shade ever closes loosely, a few turns with the included screwdriver make it meet the frame firmly and stay shut.
Open and close
Pull the slider across and the room goes dark. Slide it back and you have the whole view again, with the shade folded neatly at the edge of the frame.
More than darkness

The reflective layer bounces back summer sun, and air trapped in the honeycomb cells slows heat moving through the window. Rooms stay cooler on bright afternoons and hold warmth better on winter nights.

The soft, cellular fabric absorbs some of the sound coming through the glass: traffic, early mowers, the neighbor's dog. It will not soundproof a room, but it takes the edge off.
Who it is for

Real dark at noon, so day sleep feels like night sleep.

Keep summer dawns and afternoon light out of bedrooms and nurseries.

No holes in the walls, and a screen without glare.
Choose your direction
Pick the side the shade closes from, and keep the slider clear of handles and furniture. The shape of your window decides the rest, and each card says which shapes it suits.

The shade gathers on the right and slides across. For windows no more than 1.5 times taller than they are wide, up to 90 in wide.

The mirror image, for when the handle or a wall is on the other side. Same shape rule: no more than 1.5 times taller than wide.

Lowers like a shade. For tall, narrow windows, or any window no more than 1.5 times wider than tall, up to 70 in wide.

The finish
From inside the room: a black frame that outlines the window like a picture, with a black pleated shade inside it. It looks at home in modern bedrooms, against dark window trim and in movie rooms, and it is the finish you see in every photo and video on this page.
From the street: the side facing the glass is light, so passers-by see a pale pleated shade in a slim black frame. It reflects the sun back out and looks tidy from outside, not like foil, card or a blanket taped to the glass.
Will it fit?
Each blind is built to your numbers, so careful measuring is what makes the seal work. You need a steel tape measure, a pen, and ideally a helper.

Measure from the front edge of the recess to the glass at its shallowest point. You need at least 1.18 in (3 cm).

Handles, latches, locks and cranks stick out. Take their depth off the recess depth: 1.18 in must still be clear.

Top, middle and bottom of the recess. Write down the smallest.

Left, middle and right of the recess. Write down the smallest.
Hold the tape straight and level, do not let it bend, and round to the nearest 1/16 in.
In the order form, under Opening direction and above Add to cart, there are two required boxes, Width and Height. Type each one in inches, using the smallest width and the smallest height you measured. For fractions, use decimals to the nearest 1/16 in: 34 1/2 = 34.5, 34 3/8 = 34.375, 34 1/16 = 34.0625.
Enter the numbers exactly as measured. Do not add or take anything off; the frame is made to fit the recess size you give.
Pick the opening direction first: it sets the largest size and the shape we can build.
Example: a window 30 in wide and 60 in high is twice as tall as it is wide, so it needs top to bottom.
Most recesses are a little uneven. Using the smallest width and height means the frame fits the narrowest point, and the brush and weather strips fill the small gap where the recess is wider. Recesses that are clearly out of square are not a fit.
A blind made larger than the recess will not go in, and one made much smaller leaves gaps the strips cannot close. Measure twice before you order, ideally with a helper holding the far end of the tape.
Your blind is cut and assembled to your numbers after you order, then sent by DHL express. US orders take 5–15 business days to process, plus an estimated 5–20 business days in transit.
See our Shipping Policy for shipping estimates by destination. Ordering for a nursery or a new shift pattern? Order early.
Because it is built to your size, a made-to-measure blind is a custom item: under our Refund Policy it cannot be returned for a change of mind.
If it arrives damaged, faulty or not at the size you entered, email support@easedwell.com with your order number and photos as soon as it arrives, and we will look into it and make it right. If it is at your size but still will not go in, send photos of the recess with the tape in shot before you trim or force anything, and we will work through it with you.
Installation
No drill, no wall plugs, no handyman. The frame pieces are numbered, so they only go together one way, and the seal strips peel and stick.

Place the side frames on a flat surface, channels facing in, and match the numbered ends.

Join the top and bottom frames to the sides, with the shade fitted in its tracks. The close-up shows the matching numbers.

Only if the shade does not latch firmly: give the two side screws a few turns.

Eight caps, four on the front corners and four on the back.

Stick the brush strip near the back edge, then the weather strip just above it, peeling the backing as you go.

Hold the frame at a steep angle (about 70 degrees, as marked in the photo), set one side into the recess first, then swing the other side in until the frame stands flat with the strips pressed against the recess. Slide the shade open and closed to test.
Compared
| Framed blindFramed | Standard blackout blindRoller | Blackout curtainCurtain | Window filmFilm | |
|---|---|---|---|---|
| Seals light at the edges | ||||
| Made to your exact size | ||||
| No drilling | ||||
| Opens fully for daylight | ||||
| Insulating honeycomb |
In the box
One order is one blind, made for one window.
Specifications
| Sizes we can make | Sideways: 8 to 90 in wide, 8 to 98 in high. Top to bottom: 8 to 70 in wide, 8 to 90 in high. Shape limit 1.5. |
|---|---|
| How to order | Choose the opening direction, then type your width and height in inches in the required Width and Height boxes above Add to cart (decimals to 1/16 in, e.g. 34 1/2 = 34.5) |
| Lead time | Made to order, then sent by DHL express. For US orders, allow 5–15 business days for processing and an estimated 5–20 business days in transit. |
| Returns | Custom item: no change-of-mind returns. Damaged, faulty or wrong-size blinds: email us with photos and we make it right |
| Frame | Aluminum alloy, about 1 in (2.5 cm) wide and 1.3 in (3.3 cm) deep |
| Shade | Double-layer honeycomb, non-woven polyester with a reflective layer |
| Light | Blackout fabric in a closed track; seal strips close the gap to the recess |
| Mounting | Inside the recess, no drilling; needs 1.18 in (3 cm) of clear depth |
| Operation | Manual slider, cordless |
| Opening | Right to left, left to right or top to bottom |
| Finish | Black frame; shade black on the room side, light on the street side |
| Care | Wipe the fabric and frame with a damp cloth; no special cleaners |
Your window, made dark
Measure your recess, pick the side it closes from, and fill in the Width and Height boxes above Add to cart. Your blind is built for that one window and usually at your door in about 3 to 4 weeks.
Back to the order form
We choose practical things that do a real job around the house, describe them honestly, and look after you if something isn't right. Questions? support@easedwell.com