Clear seal strip fitted along the bottom of a white door, its flap curling onto a wooden floor

Clear Self-Adhesive Draft Seal Strip

25 mm x 5 m
$14.99
Skip to product information
Clear seal strip fitted along the bottom of a white door, its flap curling onto a wooden floor

Clear Self-Adhesive Draft Seal Strip

$14.99
Width
Quantity

View store information

Clear Self-Adhesive Draft Seal Strip

25 mm x 5 m

Processing takes 5–15 business days. Tracking provided.

Stop cold drafts at doors and windows with a clear strip you cut and stick.

  • Clear flap bridges small to larger gaps
  • Peel and press on, cut to length with scissors
  • 5 m (16.4 ft) roll in 25, 35 or 45 mm widths
Shipping & delivery

Orders are processed in 5–15 business days. Transit times vary by destination. See our Shipping Policy for estimates. Every order is tracked. We email you a tracking link when your parcel leaves.

Returns

You have 30 days to return an item. Email support@easedwell.com first and we'll tell you how.

If it arrives damaged, faulty or wrong, email us a photo with your order number. We'll resend it or refund you.

Clear self-adhesive draft seal

Close the gap. Keep the warmth in.

A see-through strip you cut to length and stick along the bottom or edge of a door, window or glass screen. Its clear flap bridges the gap, so cold air, dust and drips stay out while the door opens as normal.

Clear strip fitted along the bottom and side edge of a cream door, its flap lying on a wooden floor
5 m (16.4 ft)on every roll, cut to any length
3 widthsfor small to larger gaps
No toolsclean, peel, press, done
Crystal clearblends into any frame or finish
1 2 3 4

The problem

That chilly line along the door is warm air leaving.

Most doors and windows close against a frame with a little gap left over. You feel it as a cold draft at your ankles, a whistle on windy nights or a line of grit along the floor. The heating works harder to fill a room that keeps leaking at the edges.

  • 1
    Under the door. Usually the widest gap, and the one you feel first.
  • 2
    Latch side. Where the door meets the frame as it closes.
  • 3
    Along the top. Warm air rises and slips out here.
  • 4
    Hinge side. The thin line where you can often see light.

Windows and glass screens leak the same way, along the sash or the bottom edge. The fix does not need a contractor or a caulk gun, just something that bends with the door and stays out of sight.

How it works

One side sticks. The other side seals.

Each strip has two zones along its length. That simple split is what lets it close a gap without jamming the door.

Floor Door Cold draft 1 Adhesive bandstuck to the door face 2 Clear flapbends to close the gap Warm room Outside / hallway 1 2

1 The adhesive band sticks to the door face. 2 The clear flap bends down to the floor and stops the cold draft (blue arrow) at the gap.

  • 01

    Adhesive band

    A narrow strip of pre-applied adhesive under a peel-off film. It grips clean glass, wood, plastic and metal.

  • 02

    Clear flexible flap

    The rest of the width stays free. It rests against the frame, floor or tub edge and closes the gap.

  • 03

    Bends, then springs back

    The flap flexes as the door or window moves, so it seals when shut and gets out of the way when open.

Hands cutting a length of clear seal strip with scissors, the adhesive band and its backing film running along one edge

Up close: one edge carries the adhesive under its backing film; the rest is a free flap you can bend double. Household scissors cut it cleanly.

Hands peeling the backing film off the adhesive band and pressing the clear strip onto the bottom edge of a white door
Step 3. Peel a few inches of film and line the strip up.
Step 4. Run your hand along the edge to press it down.

Fitting

Fitted in a few minutes. No tools.

  • 1

    Clean and dry

    Wipe the edge where the strip will sit. Dust and grease are what stop tape from holding.

  • 2

    Measure and cut

    Measure the run, mark it and cut with household scissors. You can trim it narrower too.

  • 3

    Peel a little film

    Peel back the first few inches of film from the adhesive band. Line the strip up with the edge so the flap just touches the floor or frame.

  • 4

    Press as you go

    Keep peeling and pressing firmly along the whole length without stretching the strip. Close the door to check the flap sits flat.

Good to know: fit it on a dry day, not in freezing or wet conditions. Room temperature and a firm press along the whole length give the adhesive its best hold.

Where it goes

One roll, every leaky edge in the house.

Cut a piece for each spot that lets the cold in. One 5 m roll covers about five standard door bottoms.

Clear strip along the bottom of a white door, its flap curling onto a wooden floor

Door bottoms

The flap meets the floor and stops the draft that sneaks under the door.

Strip fitted along the top corner of a white door: textured adhesive band on the door face, clear flap reaching to the wooden frame

Door edges and frames

Run it along the hinge side and the top, where the door meets the frame.

Clear strip standing up in the track of a sliding window, closing the gap between frame and sash

Sliding windows

Along the track or the edge where the sash closes, so the wind stops whistling through.

Hand holding a roll of clear strip that runs down the edge of a glass door

Glass doors and screens

Sticks to clean glass. Under a shower screen it keeps splashes in the tub.

Also handy on: patio and French doors, balcony windows, kitchen cabinets and drawers, garage doors, RV and camper doors.

Beans thrown at a sealed door pile up along its bottom edge.

More than the cold

A closed gap keeps out more than drafts.

Once the gap is bridged, the things that used to slip through it have nowhere to go. In this test, a handful of loose beans thrown at a sealed door piles up along its bottom edge instead of rolling underneath.

  • Dust and gritLess sweeping along the threshold.
  • InsectsOne less way in at floor level.
  • NoiseSoftens the whistle and street sound that leak through gaps.
  • Summer heatHolds cooled air in, not just warm air.
Clear strip fitted along the bottom of a dark oak door, the wood grain showing straight through it

Clear by design

Seals like weather stripping. Disappears like glass.

Foam tape and rubber seals are made to be seen. This strip is transparent, so it takes on the color of whatever it is stuck to: white trim, a dark oak door like this one, or a chrome shower frame.

It follows the line of the edge and keeps a low profile, so nobody notices it until they notice the draft has gone.

25 mmSmall gaps

35 mmMedium gaps

45 mmLarger gaps

Adhesive bandClear flap

Total widths drawn to scale; the band and flap split is approximate. Every roll is 5 m (16.4 ft).

Sizes

Choose your width.

Every roll is 5 m (16.4 ft) long. The wider the strip, the wider its clear flap, and the bigger the gap it can cover.

Width Adhesive band Clear flap Best for
25 mm0.98 in about 10 mm about 15 mm (0.6 in) Small gaps: interior doors, window sashes
35 mm1.38 in about 10 to 15 mm about 20 to 25 mm (0.8 to 1 in) Medium gaps
45 mm1.77 in about 15 mm about 30 mm (1.2 in) Larger gaps and uneven floors

Band and flap widths are approximate and can vary between batches.

The one rule: pick a width whose clear flap is wider than your gap, so the flap overlaps the floor or frame instead of just reaching it.

Measure in one minute

  1. Close the door or window.
  2. Measure the gap at its widest point, usually under the door at the latch side.
  3. Choose the width whose flap comfortably covers that number. Between two sizes, go wider: the flap trims with scissors.

How far does one roll go?

  • About 5 door bottoms on a standard 36 in (91 cm) door
  • Or the top and both sides of one 36 x 80 in door (about 16.3 ft)

Compared

Why a clear strip beats the usual fixes.

Clear seal strip

  • Peel and press, no tools
  • Transparent on any finish
  • Flap flexes as the door moves
  • Doors, windows and glass screens

Foam draft tape

  • Visible colored foam
  • Squashes flat over time
  • Can make doors hard to close
  • Mostly frame edges only

Caulk or sealant

  • Needs a gun and a steady hand
  • Messy, with drying time
  • Cannot seal a moving door
  • Hard to remove later

Draft stopper pillow

  • Door bottoms only
  • Slides away when the door opens
  • Has to be put back every time
  • Does nothing for windows

Specifications

The details.

Product Self-adhesive clear seal strip for doors, windows and glass screens
Widths 25 mm (0.98 in), 35 mm (1.38 in) or 45 mm (1.77 in)
Length 5 m (16.4 ft) per roll
Color Transparent
Backing Pre-applied adhesive band under a peel-off film
Sticks to Clean, dry glass, wood, plastic and metal
Use Indoors and outdoors, water-resistant
Fitting Cut with scissors, peel and press, no tools or screws
One roll of clear self-adhesive seal strip with the backing film visible along one edge

In the box

1 roll, 5 m (16.4 ft)

  • In the width you choose above
  • Adhesive band protected by a peel-off film
  • The film may be red or white depending on the batch. It is peeled off and thrown away; the strip itself is always clear.

Painted or delicate surfaces

On clean, dry surfaces it comes off most finishes cleanly. On fragile paint or wallpaper, test a small piece first.

Made to stay put

The adhesive is meant for long-term use. Peeling it off and sticking it back down weakens the grip, so place it carefully the first time.

Keeping it clean

Wipe with a damp cloth. In the shower, rinse it with the rest of the screen. Keep unused strips away from small children and pets.

Before

An open gap lets cold air, dust and bugs straight under the door.

After

The clear flap rests on the floor and closes the gap. The door still swings.

Your warmer home

Warmer rooms start at the edges.

Measure the gap, pick a width, cut a piece for each drafty door and window, and press it into place. Tonight the cold stays outside where it belongs.

Why Easedwell

We choose practical things that do a real job around the house, describe them honestly, and look after you if something isn't right. Questions? support@easedwell.com

Questions

How do quantity savings work?

This product costs less when you buy more. The savings are real and are applied automatically in your cart, with no code needed.